Visitor figures are only useful if you can rely on them. Staffing plans and site comparisons built on wrong counts lead to wrong decisions. Reliable counting depends on two things: a sensor suited to the job, and an installation done the right way. Here is how WELLPOINT People Counters approach both.
What Makes WELLPOINT Counts Reliable
- Time-of-flight (ToF) sensor
The Pulse V3 uses a ToF matrix sensor: it sends out laser light and measures how long it takes to come back, which gives it distances rather than pictures. There is no camera, so the counter does not record images or video and does not identify anyone. - Two-way counting
Entries and exits are counted separately, and WELLPOINT.cloud calculates current occupancy as entries minus exits. Separate figures also give you a simple plausibility check: after closing time, the day’s entries and exits should be close to each other. - The right mounting height
The counter is mounted beside the entrance, on the door frame or the wall, 1.2 to 1.4 m above the floor; an anti-theft (EAS) gate can also carry it. - The right angle
The sensor must point straight across the doorway, at a right angle to the walking direction. - The right number of devices
One device covers a doorway up to about 2.4 m. Wider entrances use several devices, grouped in WELLPOINT.cloud as one entrance. - A suitable environment
The Pulse V3 is built for indoor use, at 0 to 40 °C, and runs on a 5 V USB power adapter in a socket near the door. - A quick test after mounting
Walk through the door a few times in both directions and check that the entries and exits appear correctly in the dashboard.
From the Counter to the Dashboard
The counter sends its counts over built-in mobile data, included in every plan, using a secure connection; Wi-Fi is also possible where mobile signal is weak. WELLPOINT.cloud is real-time, with data updates every 5 minutes on PLUS and PRO (hourly on LITE).
Privacy Without Trade-offs
The Pulse V3 does not capture images or identify visitors. Only anonymous entry and exit counts are transmitted from the counter. GDPR-friendly by design: no camera, no images, no identification of people – only anonymous entry and exit counts. Full GDPR compliance also depends on the specific data-processing context.
What This Means for Your Figures
- Reliable entry and exit counts when height, angle and the number of devices fit the doorway
- Dependable figures for staffing, trends and site comparisons
- The same setup rules at every site, so locations can be compared fairly
The WELLPOINT People Counter (Pulse V3) is made by Involver System SRL in Romania, in the European Union; a mounting bracket and two double-sided adhesive strips are in the box. Order it on shop.wellpoint.tech.
Want to see the dashboard? Request a demo account on wellpoint.cloud – the demo uses fictitious sample data.